Chestnut Grain / Conor Holden

Hall Table / Eamon Quinn

Dancing Light / Martin Wright

A luxurious soft touch finish

/ Interior wall coating with a soft touch finish.

/ The flat matt finish of Curator Enhanced Matt will disguise wall imperfections.

/ We recommend using Enhanced Matt when painting rich, deep colours, as it will enhance the colour appearance.

/ Enhanced Matt is a waterbased, low VOC, low odour paint that is 100% acrylic technology based.

/ Enhanced Matt is most often used in bedrooms, sitting rooms and ceilings. However, due to its extremely durable finish you are not limited to using it in these places alone. Please contact us to determine the most appropriate finish for your project.

/ Enhanced Matt has excellent stain resistance and is a washable finish. We recommend washing stains as soon as possible with a clean, lint free cloth and clean, warm, soapy water. Do not apply too much pressure as excessive scrubbing may damage the paint finish. Oil based stains may not be completely removed, marks from permanent markers will not be removed.

Application + Information

Application

/ Suitable for brush, roller or spray application. Appropriate PPE is recommended.

/ Two coats of Enhanced Matt are recommended for full colour and product performance.

/ Coverage of Enhanced Matt is up to 325-490 Sq. Ft. per gallon depending on surface conditions and technique.

/ For sealing new or bare surface (e.g. plaster or drywall), a suitable primer is recommended. Alternatively, the first coat of Enhanced Matt can be thinned with max 5% water. Up to 10% water may be used for spraying application.

Drying Time

/ At room temperature, Enhanced Matt is touch dry in 2-4 hours, depending on film thickness and drying conditions.

/ At room temperature, Enhanced Matt can be recoated in 4-6 hours, depending on film thickness and drying conditions.

/ Full paint properties do not develop for a minimum of 7-10 days after application (depending on drying conditions). The paint should not be washed before this time has elapsed.

/ Temperature, humidity and film thickness will affect the drying time. Air ventilation will help improve drying conditions.

Search

English